AMS DCB-274 Bedienungsanleitung PDF herunterladen (Seite 56)

ADVANCED MICRO SYSTEMS, INC. SMC-27X2 SOFTWARE

2. Write program to location 100.

P100 Enter program mode at address 100.

100 A129 Read port states.

102 A0 Turn port 4 off.

104 P0 Exit program mode.

3. Set Trip Point.

In “dumb terminal” mode enter T1000 100. This tells the controller to run the program located at

address 100 when the step position is 1000.

4. Run program.

Enter the “G” command. Port 4 will turn on and the motor will start moving. When the motor

position is at 1000, the program will vector to address 100 and run that sequence. The number 8,

signifying port 4, will appear on the screen.

Function Type NV Bytes

Set Final (Slew) Velocity in SPS Default, Immediate, Program 3

Command

Mnemonic

(Name) V (n)

Data 1

SPS (40- >36,000)

Data 2

None

Result

None

V (Set Slew Speed)

This is the maximum speed to be used after acceleration from the initial velocity. The maximum speed will be

limited by the motor capability and/or power driver circuitry.

The final output velocity is divided by the value of “D.” This value is independent of constant velocity (M),

jog (B) or home (F) speeds and is used when indexing absolute or relative (+, -, R commands).

If full or half step mode is chosen, the acceleration time may become to fast for larger motors. This is due to

the high speed SMC27X2 microprocessor. A “D 2” pre-scale divider may be required to provide smoother

acceleration characteristics.

Example

Assume that the desired running speed is 12,000 full steps per second (3600 RPM). The speed (“V”) can be

set to 24,000 SPS with D = 2.

Thus:

SPS (motor) = V/D or 24000/2 =12,000 SPS

With the “D 2” divider, the full output speed range is approximately 20 to 20,000 SPS.

See “Default Table.”

This command is generally implemented during the initial customer default parameter assignment. However,

it may be implemented and changed within a program. Following is an example:

P 0 Enter program mode.

V 10000 Change the slew velocity to 10000 SPS.

P Exit program mode.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare

More products and manuals for DVD players Samsung

Models	Document Type
AH68-01959S	User Manual Samsung HT-TXQ120 User manual, 36 pages
DVD-C631P	User Manual Samsung DVD-C631P User manual, 24 pages
DVD-FP580	User Manual Samsung DVD-FP580 User's Manual, 63 pages
DVD-HD931	User Manual Samsung DVD-HD931 User manual, 26 pages
SP43T9	User Manual Samsung SP-54T8HE User manual, 64 pages
DVD-HD870	User Manual Samsung DVD-HD870 User manual, 64 pages
DVD-HD950	User Manual Samsung DVD-HD950 User manual, 75 pages
DVD-HR725	User Manual Samsung DVD-HR725 User manual, 135 pages
AK68-00102A	User Manual Samsung AK68-00102A User's Manual, 21 pages
DVD-HD845	User Manual Samsung DVD-HD845 User's Manual, 62 pages
HT-TQ22	User Manual Samsung HT-TQ22 User manual, 80 pages
DVD-V6500	User Manual Samsung DVD-V6500K User manual, 54 pages
AH68-01008B	User Manual Samsung HT-DL200 User manual, 23 pages
SN-324	User Manual Samsung SN-324 User's Manual, 5 pages
HT-TX75	User Manual Samsung HT-TX75 User manual, 39 pages
DVD-V8080	User Manual Samsung DVD-V8080 User's Manual, 34 pages
DVD-L300WDEU	User Manual Samsung DVD-L300WDEU User's Manual, 34 pages
DVD-R160	User Manual Samsung DVD-R160 User's Manual, 83 pages
AH68-02293B	User Manual Samsung HT-C350 User manual, 39 pages
DVD-R155	User Manual Samsung DVD-R155 User's Manual, 75 pages

AMS DCB-274 Bedienungsanleitung Seite 56

Kommentare zu diesen Handbüchern

Samsung VP-L700U manuals

More products and manuals for DVD players Samsung